It took us several hours to remove the existing shutter on this factory entrance door. We used a scissor lift to get to the 5m high roller and motor; and a tele-handler to get the door down in the end. But it was the unusual heavy amount of welding holding the door on which held… Read More

We received a request for repair of the bottom of a steel shutter over a warehouse entrance. A fork lift mast had damaged it during working hours. The customer, based in Shrewsbury, needed to repair the shutter both for physical security, and to allow the alarm to connect with the floor at the damaged point. … Read More

We fitted the shutter shown this week to replace on old manual shutter. We surveyed and then fitted the shutter within 5 working days, powder coated. Fixed to RSJ steel girders, this is an ideal application for the product.  As usual, one of our yellow step ladders is visible. The photo was taken half-way through… Read More

A sectional door whose motor needed replacing, in Chester. We also serviced the running of this door, which was 5m in height. Such work requires careful planning and safety methods.